ANNEX 18 in brief
to the Convention on
International Civil Aviation
The Safe Transport of Dangerous Goods by Air
More than half of the cargo carried by all modes of transport in the world is dangerous cargo – explosive, corrosive, flammable, toxic and even radioactive. These dangerous goods are essential for a wide variety of global industrial, commercial, medical and research requirements and processes. Because of the advantages of air transport, a great deal of this dangerous cargo is carried by aircraft.
ICAO recognizes the importance of this type of cargo and has taken steps to ensure that such cargo can be carried safely. This has been done by adopting Annex 18, together with the associated document Technical Instructions for the Safe Transport of Dangerous Goods by Air. Other codes have existed for regulating the carriage of dangerous goods by air, but these did not apply internationally or were difficult to enforce internationally and, moreover, were not compatible with the corresponding rules of other transport modes.
Annex 18 specifies the broad Standards and Recommended Practices to be followed to enable dangerous goods to be carried safely.
The Annex contains fairly stable material requiring only infrequent amendment using the normal Annex amendment process. The Annex also makes binding upon Contracting States the provisions of the Technical Instructions, which contain the very detailed and numerous instructions necessary for the correct handling of dangerous cargo. These require frequent updating as developments occur in the chemical, manufacturing and packaging industries, and a special procedure has been established by the Council to allow the Technical Instructions to be revised and reissued regularly to keep up with new products and advances in technology.
The ICAO requirements for dangerous goods have been largely developed by a panel of experts which was established in 1976. This panel continues to meet and recommends the necessary revisions to the Technical Instructions. As far as possible the Technical Instructions are kept aligned with the recommendations of the United Nations Committee of Experts on the Transport of Dangerous Goods and with the regulations of the International Atomic Energy Agency. The use of these common bases by all forms of transport allows cargo to be transferred safely and smoothly between air, sea, rail and road modes.
The ICAO requirements for the safe handling of dangerous goods firstly identify a limited list of those substances which are unsafe to carry in any circumstances and then show how other potentially dangerous articles or substances can be transported safely.
The nine hazard classes are those determined by the United Nations Committee of Experts and are used for all modes of transport. Class 1 includes explosives of all kinds, such as sporting ammunition, fireworks and signal flares. Class 2 comprises compressed or liquefied gases which may also be toxic or flammable; examples are cylinders of oxygen and refrigerated liquid nitrogen. Class 3 substances are flammable liquids including gasoline, lacquers, paint thinners, etc. Class 4 covers flammable solids, spontaneously combustible materials and materials which, when in contact with water, exit flammable gases (examples are some powdered metals, cellulose type film and charcoal). Class 5 covers oxidizing material, including bromates, chlorates or nitrates; this class also covers organic peroxides which are both oxygen carriers and very combustible. Poisonous or toxic substances, such as pesticides, mercury compounds, etc., comprise Class 6, together with infectious substances which must sometimes be shipped for diagnostic or preventative purposes. Radioactive materials are in Class 7; these are mainly radioactive isotopes needed for medical or research purposes but are sometimes contained in manufactured articles such as heart pacemakers or smoke detectors. Corrosive substances which may be dangerous to human tissue or which pose a hazard to the structure of an aircraft are dealt with in Class 8 (for example, caustic soda, battery fluid, paint remover). Finally, Class 9 is a miscellaneous category for other materials which are potentially hazardous in air transport, such as magnetized materials which could affect the aircraft's navigational systems.
Annex 18 and the Technical Instructions became effective on 1 January 1983 and applicable on I January 1984 when all of the Contracting States of ICAO were expected to conform to the ICAO requirements and to give them legislative recognition.
Reference: ICAO booklet Annexes 1 to 18
Other Annexes: